[1]俞缙,林从谋,赵晓豹.岩体节理非线性法向循环加载本构模型的改进[J].华侨大学学报(自然科学版),2009,30(6):694-697.[doi:10.11830/ISSN.1000-5013.2009.06.0694]
　YU Jin,LIN Cong-mou,ZHAO Xiao-bao.Improvement of Nonlinear Constitutive Model for Rock Fractures under Normal Cyclic Loading[J].Journal of Huaqiao University(Natural Science),2009,30(6):694-697.[doi:10.11830/ISSN.1000-5013.2009.06.0694]
点击复制

岩体节理非线性法向循环加载本构模型的改进()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第30卷
期数:
2009年第6期
页码:
694-697
栏目:
出版日期:
2009-11-20

文章信息/Info

Title:
Improvement of Nonlinear Constitutive Model for Rock Fractures under Normal Cyclic Loading
文章编号:
1000-5013(2009)06-0694-04
作者:
俞缙; 林从谋; 赵晓豹
华侨大学岩土工程研究所; 南京大学地球科学与工程学院
Author(s):
YU Jin1;  LIN Cong-mou1;  ZHAO Xiao-bao2
1.Institute of Geotechnical Engineering, Huaqiao University, Quanzhou 362021, China; 2.College of Earth Sciences and Engineering, Nanjing University, Nanjing 210093, China
关键词:
岩体节理;  循环加卸载;  非线性法向变形;  本构模型
Keywords:
rock fractures;  cyclic loading;  nonlinear normal deformation;  constitutive model
分类号:
TU452
DOI:
10.11830/ISSN.1000-5013.2009.06.0694
文献标志码:
A
摘要:
假定卸载曲线和重加载曲线在法向的起始刚度由前一次加载曲线和卸载曲线决定,从而完全确定岩体节理循环加载本构方程.对模型参数的不同取值,将已有的不同模型统一起来,通过卸载曲线渐近线内移的方式来反映滞回特性.将改进的节理弹性非线性法向变形本构模型拓展到循环加、卸载条件下,考虑节理面几何特性、充填物特性及岩石类型的复杂性,在将节理变形的非线性程度定量化描述的同时,修正以往模型对曲线形式做出硬性假定的方式.新模型的预测结果与试验结果吻合良好,验证了模型的可行性.
Abstract:
It is supposed that the initial normal stiffness of unloading and reloading curves is calculated from those of the previous loading and unloading curves,and then the cyclic loading constitutive equation for rock fracture is established.With different values of the parameters,this model generalizes the existing different models.By moving inward the asymptote of unloading curves,the characteristic of hysteresis is reflected.Describing the extent of nonlinearity quantitatively,the improved nonlinear elastic constitutive model for normal deformation of rock fractures is extended to cyclic loading process,which changes the way that the assumption is made by the kind of the stress-deformation curves in previous models made.Considering the geometric characters,infill mineralogy of the rock fractures and the rock types,the predication results fitted the test results well in adopting the new model for the predication of others test data,which verifies the feasibility of the new model.

参考文献/References:

[1] LANARO F. A random field model for surface roughness and aperture of rock fractures [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 2000(8):1195-1210.doi:10.1016/S1365-1609(00)00052-6.
[2] MALAMA B, KULATILAKE P H S W. Models for normal fracture deformation under compressive loading [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 2003(6):893-901.doi:10.1016/S1365-1609(03)00071-6.
[3] 俞缙, 赵晓豹, 赵维炳. 改进的岩体节理弹性非线性法向变形本构关系研究 [J]. 岩土工程学报, 2008(9):1316-1321.
[4] BANDIS S C, LUMSDEN A C, BARTON N R. Fundamentals of rock fracture deformation [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1983(6):249-268.
[5] JING L, NORDLUND E, STEPHANSSON O. A 3-D constitutive model for rock joints with anisotropic friction and stress dependency in shear [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1994(2):173-178.
[6] GOODMAN R E. Methods of geological engineering in discontinuous rocks [M]. New York:wiley, 1976.472-494.
[7] BOULON M, ARMAND G, HOEIT N. Experimental investigations and modeling of shearing of calcite healed discontinuities of grandiosity under typical stresses [J]. Engineering Geology, 2002.117-133.
[8] SOULEY M, HOMAND F, AMADEI B. An extension to the Saeb and Amadei constitutive model for rock joints to include cyclic loading paths [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1995(2):101-109.
[9] MAKURAT A, AHOLA M, KHAIR K. The decovalex test-case one [J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1995(5):399-408.
[10] 尹显俊, 王光纶. 岩体节理法向循环加载本构关系研究 [J]. 岩石力学与工程学报, 2005(7):1159-1165.doi:10.3321/j.issn:1000-6915.2005.07.012.

备注/Memo

备注/Memo:
国家自然科学基金资助项目(40702046); 福建省自然科学基金资助项目(2006J0445); 建设部科学技术项目计划(06-K1-23); 华侨大学高层次人才科研启动项目(08BS414)
更新日期/Last Update: 2014-03-23