[1]彭长青,尚荣艳,方瑞明.低压开关触头压降取样电路的设计[J].华侨大学学报(自然科学版),2018,39(2):240-245.[doi:10.11830/ISSN.1000-5013.201706043]
　PENG Changqing,SHANG Rongyan,FANG Ruiming.Design of Sampling Circuit for Measuring ContactVoltage Drop of Low Voltage Switch[J].Journal of Huaqiao University(Natural Science),2018,39(2):240-245.[doi:10.11830/ISSN.1000-5013.201706043]
点击复制

低压开关触头压降取样电路的设计()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第39卷
期数:
2018年第2期
页码:
240-245
栏目:
出版日期:
2018-03-20

文章信息/Info

Title:
Design of Sampling Circuit for Measuring ContactVoltage Drop of Low Voltage Switch
文章编号:
1000-5013(2018)02-0240-06
作者:
彭长青;  尚荣艳;  方瑞明
华侨大学 信息科学与工程学院, 福建 厦门 361021
Author(s):
PENG Changqing;  SHANG Rongyan;  FANG Ruiming
College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China
关键词:
低压开关;  触头压降;  检测电路;  取样电路
Keywords:
low voltage switch;  contact voltage drop;  detection circuit;  sampling circuit
分类号:
TM52
DOI:
10.11830/ISSN.1000-5013.201706043
文献标志码:
A
摘要:
针对低压开关通断前后端电压相差很大,触头压降检测仪表难以兼顾精度与安全的问题,利用稳压二极管的稳压特性,提出一种检测触头压降的无源电路取样方案.在此基础上,对取样电路中限流电阻和稳压二极管的影响进行理论分析,确定选取规则.然后,通过直流特性测试,检测取样电路测量误差;通过频率特性测试,检测取样电路对不同频率谐波的衰减和失真情况;通过模拟工况测试,检测取样电路的实际应用情况.实验结果表明:低压开关触头压降取样电路有助于实现精确测量触头压降,并保证检测仪表安全.
Abstract:
Aiming at the problem that the contact voltage difference of low voltage switch between making and breaking is so large that the instrumentation is difficult to balance the precision and safety issues, a new method of passive circuit sampling for measuring the contact voltage drop was proposed by using the steady voltage characteristics of the Zener diode. On this basis, the influence of the current-limiting resistor and the Zener diode in the contact voltage drop sampling circuit was analyzed theoretically and the selection rules were determined. The detection circuit characteristic test was used to detect the measurement error of the sampling circuit. Through the test of frequency characteristic, the attenuation and distortion of different frequency harmonics in the sampling circuit were detected. The practical application of the sampling circuit was tested by simulating the condition test. The experimental results show that the contact voltage drop sampling circuit of the low voltage switch can accurately measure the contact voltage drop and ensure the safety of the measuring instrument.

参考文献/References:

[1] 王淑娟,余琼,翟国富.电磁继电器接触失效机理判别方法[J].电工技术学报,2010,25(8):38-44.DOI:10.3969/j.issn.1000-6753.2010.08.007.
[2] 罗毅,杨昆,董麟,等.开关触点接触电阻动态测量方法研究[J].仪器仪表学报,2015,36(1):49-55.DOI:10.19650/j.cnki.cjsi.2015.01.008.
[3] 蓝磊,陈功,文习山,等.基于动态电阻测量的SF6断路器触头烧蚀特性[J].高电压技术,2016,42(6):1731-1738.DOI:10.13336/j.1003-6520.hve.20160616008.
[4] 李玲玲,马东娟,李志刚.触点动态接触电阻时间序列混沌预测[J].电工技术学报,2014,29(9):187-193.DOI:10.3969/j.issn.1000-6753.2014.09.027.
[5] 王召斌,翟国富,黄晓毅.电磁继电器贮存期接触电阻增长的动力学模型[J].电工技术学报,2012,27(5):205-211.
[6] HOTTA K,INAGUCHI T.Contact welding mechanism with bounce arc on Ag and Cu contacts in low-voltage switches[J].IEEE Transactions on Components Packaging and Manufacturing Technology,2017,7(3):363-370.DOI:10.1109/TCPMT.2017.2652458.
[7] HOTTA K,INAGUCHI T.Dependence of contact weld force on arc energy supplied to contact surface in low voltage switches[C]//Holm Conference on Electrical Contacts.San Diego:IEEE Press,2015:160-165.DOI:10.1109/HOLM.2015.7355090.
[8] CHENG Gao,FU Chengcheng,HUANG Jiaoying,et al.Failure analysis for electromagnetic relay contacts adhesion by using XES[C]//Prognostics and System Health Management Conference.Paraiba:IEEE Press,2014:97-101.DOI:10.1109/PHM.2014.6988141.
[9] 李玲玲,韩俊杰,王成山.基于灰色理论的继电器电接触可靠性预测[J].机械工程学报,2012,48(2):68-72.DOI:10.3901/JME.2012.02.068.
[10] 张菲菲,李志刚,李玲玲,等.触点寿命试验中初始接触电阻与寿命的关系研究[J].电力系统保护与控制,2015,43(5):63-68.
[11] 陆俭国,李奎,杜太行,等.塑壳断路器可靠性理论与验证试验方法[J].电工技术学报,2012,27(5):180-185.DOI:10.19595/j.cnki.1000-6753.tces.2012.05.027.
[12] 杜太行,陆俭国,张露,等.低压电器触点间收缩电阻检测技术的研究[J].电工技术学报,2003,18(2):41-44.DOI:10.19595/j.cnki.1000-6753.tces.2003.02.010.
[13] 杜太行.继电器电寿命试验计算机测控技术与数据处理技术[D].天津:河北工业大学,2002.
[14] 陈默.高压直流大功率继电器电寿命模型的研究[D].哈尔滨:哈尔滨工业大学,2016.
[15] 王容华.直流继电器电性能测试系统及实验研究[D].武汉:华中科技大学,2012.
[16] 邱进,阮江军,吴士普,等.特快速暂态过电压光学测量系统的设计[J].电力自动化设备,2017,37(2):205-210.DOI:10.16081/j.issn.1006-6047.2017.02.031.
[17] FROST B J.Mass parametric acquisition of relay contact data during high-speed life test[C]//Holm Conference on Electrical Contacts.New Orleans:IEEE Press,2014:1-7.DOI:10.1109/HOLM.2014.7031069.

备注/Memo

备注/Memo:
收稿日期: 2017-06-14
通信作者: 彭长青(1976-),男,实验师,主要从事电气装置状态监测与故障诊断的研究.E-mail:mymail@hqu.edu.cn.
基金项目: 国家自然科学基金青年科学基金资助项目(51707068); 福建省厦门市科技计划项目(3502Z20153029)
更新日期/Last Update: 2018-03-20