[1]张清梅,朱大庆,邹怀远.图案化基板LED中荧光粉对光学性能的影响[J].华侨大学学报(自然科学版),2017,38(5):687-692.[doi:10.11830/ISSN.1000-5013.201503026]
　ZHANG Qingmei,ZHU Daqing,ZOU Huaiyuan.Influence of Phosphor Coating Layer to Optical Performance ofLED With Patterned Board[J].Journal of Huaqiao University(Natural Science),2017,38(5):687-692.[doi:10.11830/ISSN.1000-5013.201503026]
点击复制

图案化基板LED中荧光粉对光学性能的影响()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第38卷
期数:
2017年第5期
页码:
687-692
栏目:
出版日期:
2017-09-20

文章信息/Info

Title:
Influence of Phosphor Coating Layer to Optical Performance ofLED With Patterned Board
文章编号:
1000-5013(2017)05-0687-06
作者:
张清梅1; 2;  朱大庆1; 2;  邹怀远1; 2
1. 华侨大学 信息科学与工程学院, 福建 厦门 361021;2. 福建省光传输与变换重点实验室, 福建 厦门 361021
Author(s):
ZHANG Qingmei1; 2;  ZHU Daqing1; 2;  ZOU Huaiyuan1; 2
1. College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China; 2. Fujian Provincial Key Laboratory of Light Propagation and Transformation, Xiamen 361021, China
关键词:
荧光粉层;  图案化基板;  出光效率;  空间颜色分布
Keywords:
phosphor coating layer;  patterned board;  light extraction efficiency;  angular color uniformity
分类号:
TN312.8
DOI:
10.11830/ISSN.1000-5013.201503026
文献标志码:
A
摘要:
采用基板上加倒锥形图案化的新型封装方式,用蒙特卡洛光线追迹法仿真保形涂覆荧光粉体积比和厚度变化时,发光二极管(LED)光源光色品质的变化.仿真结果表明:LED光源的出光效率在图案化倾斜角α为30°,45°时,出光效率的提升量最大;α为45°时,传统平面封装光源的空间颜色均匀性最大优化幅度分别为9.1%,8.4%;荧光粉厚度、体积比不变时,颜色均匀性相对于传统平面封装光源的优化幅度最大为11.1%,10.4%,光源的色温差值最大减小1 006,1 319 K;在厚度、体积比参数中任选一个进行优化,均可改善LED产品的颜色均匀性,而优化图案化结构可使空间颜色均匀性更明显地提高.
Abstract:
Effects of variations of conformal coating phosphors thickness and volume ratio on optical consistency of the new packaging light emitting diodes(LED)including the luminous and chromatic performance were simulated studied by Monte Carlo ray tracing method. The new packaging LED had a patterned board with regular invert cone structures. Simulation results revealed that a maximum light extraction efficiency improvement of the LED would achieve when the inclination angles of the invert cone structures were 30° and 45°. When α=45°, the largest improvement of angular color uniformity(ACU)compared to traditional planar packaging was 9.1% and 8.4% respectively. When the phosphor volume ratio and thickness were not changed, the largest improvement of ACU was 11.1% and 10.4%. When the thickness and the volume ratio of the phosphor layer changed, the correlated color temperature difference value of patterned structure LED was 1 006, 1 319 K lower than the LED with planar board. At this point, the patterned board has an obvious impact on the ACU of the LED. Optimization of phosphor layer thickness or volume ratio parameters can improve the light quality of LED packages. In the meantime, optimize the patterned structure can make the space color uniformity increase more obviously.

参考文献/References:

[1] KIM J K,LUO H,SCHUBERT E F,et al.Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup[J].Japanese Journal of Applied Physics,2005,44(21):L649-L651.
[2] 刘志彬,钱可元,罗毅,等.荧光粉层形状对白光LED空间色温均匀性的影响[J].半导体光电,2012,33(5):651-656.
[3] LI Zongtao,WANG Qinghui,TANG Yong,et al.Light extraction improvement for LED COB devices by introducing a patterned leadframe substrate configuration[J].Transactions on Electron Devices,2013,60(4):1397-1403.
[4] WU Dan,WANG Kai,LIU Sheng.Enhancement of light extraction efficiency of multi-chips light-emitting diode array packaging with various microstructure arrays[C]//61st Electronic Components and Technology Conference.Florida:IEEE Press,2011:242-245.
[5] SOMMER C,HARTMANN P,PACHLER P,et al.A detailed study on the requirements for angular homogeneity of phosphor converted high power white LED light sources[J].Optical Materials,2009,31(6):837-848.
[6] SOMMER C,WENZL F P,HARTMANN P,et al.Tailoring of the color conversion elements in phosphor-converted high-power LEDs by optical simulations[J].Photonics Technology Letters,2008,20(9):739-741.
[7] LIU Zongyuan,WANG Kai,LUO Xiaobing,et al.Precise optical modeling of blue light-emitting diodes by Monte Carlo ray-tracing[J].Optics Express,2010,18(9):9398-9412.
[8] LIU Zongyuan,LIU Sheng,WANG Kai,et al.Studies on optical consistency of white LEDs affected by phosphor thickness and concentration using optical simulation[J].IEEE Transactions on Components and Packaging Technologies,2010,33(4):680-687.
[9] ZHENG Huai,FU Xing,HU Run,et al.Angular color uniformity improvement for phosphor-converted white light-emitting diodes by optimizing remote coating phosphor geometry[C]//13th International Conference on Electronic Packaging Technology and High Density Packaging.Guilin:IEEE Press,2012:1483-1486.
[10] 张清梅,朱大庆.图案化基板对集成封装LED的光色品质的影响[J].发光学报,2014,35(10):1276-1282.
[11] LIU Zongyuan,LIU Sheng,WANG Kai,et al.Optical analysis of phosphor’s location for high-power light-emitting diodes[J].Device and Materials Reliability,2009,9(1):65-73.
[12] 赵敏,张万生.白光LED色温漂移的研究[J].半导体技术,2010,35(9):214-218.

备注/Memo

备注/Memo:
收稿日期: 2015-03-24
通信作者: 朱大庆(1966-),男,副教授,主要从事光学设计、LED照明技术的研究.E-mail:zhudaqing@hqu.edu.cn.
基金项目: 华侨大学高层次人才科研启动项目(09BS103); 福建省光传输与变换重点实验室开放课题资助项目(2014202)
更新日期/Last Update: 2017-09-20