[1]俞能跃,陆静.溶胶-凝胶抛光膜中磨料-基体界面结合强度分析[J].华侨大学学报(自然科学版),2019,40(4):510-514.[doi:10.11830/ISSN.1000-5013.201812025]
　YU Nengyue,LU Jing.Analysis of Interface-Bond Strength of Abrasive-Matrixin Sol-Gel Polishing Film[J].Journal of Huaqiao University(Natural Science),2019,40(4):510-514.[doi:10.11830/ISSN.1000-5013.201812025]
点击复制

溶胶-凝胶抛光膜中磨料-基体界面结合强度分析()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第40卷
期数:
2019年第4期
页码:
510-514
栏目:
出版日期:
2019-07-10

文章信息/Info

Title:
Analysis of Interface-Bond Strength of Abrasive-Matrixin Sol-Gel Polishing Film
文章编号:
1000-5013(2019)04-0510-05
作者:
俞能跃;  陆静
华侨大学 制造工程研究院, 福建 厦门 361021
Author(s):
YU Nengyue;  LU Jing
Manufacturing Engineering Research Institute, Huaqiao University, Xiamen 361021, China
关键词:
磨料;  界面结合;  拉伸强度;  表面处理
Keywords:
abrasive;  interface bonding;  tensile strength;  surface treatment
分类号:
TG731
DOI:
10.11830/ISSN.1000-5013.201812025
文献标志码:
A
摘要:
对粒径分别为40,3 μm 的金刚石磨料进行不同的表面处理,通过测量拉伸强度,以及扫描电子显微镜、红外光谱等方法分析表面处理对界面结合强度的影响.研究表明:在粒径为40 μm的金刚石表面镀钛并氧化处理后,界面结合强度提升20%;在粒径为3 μm的金刚石表面涂覆FeOOH,界面结合强度不会出现明显的变化.
Abstract:
Different surface treatments for diamond abrasives with particle sizes of 40 and 3 μm were conducted, and the influence of surface treatment on interface bonding strength was analyzed by means of tensile strength measurement, scanning electron microscopy and infrared spectroscopy. Studies show that the interface bond strength could increase by 20% after the diamond abrasive with a particle size of 40 μm was coated with titanium and oxidized. When the diamond abrasive having a particle size of 3 μm was coated with FeOOH, the interface bond strength would not change significantly.

参考文献/References:

[1] HU Guangqiu,LU Jing,XU Xipeng.Polishing silicon wafers with the nanodiamond abrasive tools prepared by sol-gel technique[J].Key Engineering Materials,2011,496:1-6.DOI:10.4028/www.scientific.net/KEM.496.1.
[2] 徐西鹏,刘娟,于怡青,等.凝胶结合剂磨粒工具制备及其磨抛性能研究[J].机械工程学报,2013,49(19):156-162.DOI:10.3901/JME.2013.19.156.
[3] LUO Qiufa,LU Jing,XU Xipeng.A comparative study on the material removal mechanisms of 6H-SiC polished by semi-fixed and fixed diamond abrasive tools[J].Wear,2016,350/351:99-106.DOI:10.1016/j.wear.2016.01.014.
[4] LU Jing,LI Yang,XU Xipeng.The effects of abrasive yielding on the polishing of SiC wafers using a semi-fixed flexible pad[J].Journal of Engineering Manufacture,2015,229(51):170-177.
[5] LUO Qiufa,LU Jing,XU Xipeng.Study on the processing characteristics of SiC and sapphire substrates polished by semi-fixed and fixed abrasive tools[J].Tribology International,2016,104:191-203.DOI:10.1016/j.triboint.2016.09.003.
[6] 高涛,彭伟,姚春燕.金刚石表面处理的应用和发展[J].金刚石与磨料磨具工程,2004(3):6-9.DOI:10.3969/j.issn.1006-852X.2004.03.002.
[7] WEI Chenlong,CHENG Jigui,LI Jianfeng,et al.Tungsten-coated diamond powders prepared by microwave-heating salt-bath plating[J].Powder Technology,2018,338:274-279.DOI:10.1016/j.powtec.2018.07.035.
[8] 张荻,苑孟颖,谭占秋,等.金刚石/Cu复合界面导热改性及其纳米化研究进展[J].金属学报,2018,54(11):1586-1596.
[9] BREVAL E,CHENG Jiping,AGRAWAL D K.Development of titanium coatings on particulate diamond[J].Journal of the American Ceramic Society,2000,83(8):2106-2108.DOI:10.1111/j.1151-2916.2000.tb01524.x.
[10] KANG Qiping,HE Xinbo,REN Shubin,et al.Microstructure and thermal properties of copper: Diamond composites with tungsten carbide coating on diamond particles[J].Materials Characterization,2015,105:18-23.
[11] LIN Bin,WANG Xitao,ZHANG Yang,et al.Interface characterization of a Cu-Ti-coated diamond system[J].Surface and Coatings Technology,2015,278:163-170.DOI:10.1016/j.surfcoat.2015.08.006.
[12] ZHAO Dongpeng,WANG Zelong,XI Yingying,et al.Preparation of silica-coated ultrafine diamond and dispersion in ceramic matrix[J].Materials Letters,2013,113:134-137.DOI:10.1016/j.matlet.2013.09.052.
[13] LU Jing,WANG Yanhui,ZANG Jianbing,et al.Protective silicon coating for nanodiamonds using atomic layer deposition[J].Applied Surface Science,2007,253(7):3485-3488.
[14] 曹学功.镍-磷-金刚石复合镀层的耐磨性[J].华侨大学学报(自然科学版),2000,21(1):21-23.DOI:10.3969/j.issn.1000-5013.2000.01.005.
[15] LIU X F,LI Y Z.The microanalysis of the bonding condition between coated diamond and matrix[J].International Journal of Refractory Metals and Hard Materials,2003,21(3/4):119-123.DOI:10.1016/s0263-4368(02)00103-8.
[16] WANG Yanghui,ZANG Jianbing,ZHANG Xinghong,et al.Interface bonding between Ti-coated CBN and vitrified bond[J].Key Engineering Materials,2004,259/260:14-18.
[17] YAN N,ZHAO D P,WANG L,et al.Preparation and sintering of silica-coated ultrafine diamonds: Vitrified bond composite powders[J].International Journal of Refractory Metals and Hard Materials,2014,43:212-215.
[18] LIU Juan,XU Xipeng.Fabrication of ultra-fine diamond abrasive tools by sol-gel[J].Materials Science Forum,2004,471/472:426-430.DOI:10.4028/www.scientific.net/MSF.471-472.426.
[19] NAKAMURA H,YAN J,SYOJI K,et al.Development of a polishing disc containing granulated fine abrasives[J].Key Engineering Materials,2003,238/239:257-262.DOI:10.4028/www.scientific.net/KEM.238-239.257.
[20] 张向红,王艳辉,臧建兵,等.低熔高强纳米陶瓷结合剂粗粒度超硬工具[J].金刚石与磨料磨具工程,2011,31(1):32-34.DOI:10.3969/j.issn.1006-852X.2011.01.008.
[21] 王艳辉.金刚石磨料表面镀钛层的制备、结构、性能及应用[D].秦皇岛:燕山大学,2003.

备注/Memo

备注/Memo:
收稿日期: 2018-12-14
通信作者: 陆静(1981-),女,教授,博士,主要从事纳米碳材料表面改性、新型研磨抛光工具的制备、光电材料基片的超精密加工的研究.E-mail:lujing26@hqu.edu.cn.
基金项目: 福建省科技计划项目(2010I0009); 福建省厦门市科技计划项目(3502Z20173049)
更新日期/Last Update: 2019-07-20